60# injectors for the 1.4t are only intended for full E85 high power builds. If you are running gas or flex you will want the 42# injectors found here.
This is a set of (4) 60#/630cc DeatschWerks injectors for your modified 1.4T Sonic, Cruze, Trax, or Encore. DeatschWerks injectors are dynamically flow matched, leak tested, and balanced before shipping. These injectors are the based around the most modern Bosch architecture and tune easier/better than previous generation injectors. We include EV1 to EV6 adapters to make these plug and play for the LUJ/LUV engine.
Stock 1.4T injectors are standard length 33# injector with an EV1 plug. This is the most common style of injector. As you add mods to your vehicle, eventually you will need to upgrade the injectors. The stock injector max around 170WHP and are sufficient for all but the most heavily modified stock turbo setups. How far you can push a stock injector is based on the fuel blend in your state so it can be a good idea to upgrade if you plan on a lot of bolt ons.
For greater injector control and increased idle stability, we offer an FSCM tune to go along with your normal PCM tune, found here.
60# injectors should be used for full E85 builds and builds with larger turbos. Due to their ability to pulse as low as 1ms, they will idle and tune properly even on Gas. On E85 these injectors will support 250WHP and higher with lower ethanol content. (E85 requires 30% more volume than gas as same power levels).
- Static Flow Rate @ 43.5PSI (300kPa) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
- Connector style: USCAR/EV6
- High Impedance
- Minimum Injector Pulse-width: 0.2446ms
- Series: EV14
- Factory fitted with Viton upper and lower o-rings
- Compatible with all fuel types
PCM programming is required whenever your injector size is changed.
Sold in sets of 4.
Recently viewed