This is a set of (4) 80#/800cc DeatschWerks injectors for your modified LSJ, LE5, L61, or any port injected Ecotec platform car. DeatschWerks injectors are dynamically flow matched, leak tested, and balanced before shipping. These injectors are the based around the most modern Bosch architecture and tune easier/better than previous generation injectors. While slightly smaller than the old Siemens 80# injectors at 76#, we are keeping the naming scheme the same for customer ease.
These injectors require an EV6 injector harness on an LSJ, found here. No injector harness is needed for 2.2/2.4 cars.
80#/800cc injectors are a great injector size for those looking to run E85 on their supercharged car or take them quite far on a turbo setup. They can support higher boost on turbo setups, especially when paired with our boost reference fuel pressure system, found here. If you have any questions regarding injector size, please email Tyler.V@zzperformance.com for LSJ and Adam.W@zzperformance.com for 2.2/2.4.
- Static Flow Rate @ 43.5PSI (300kPa) w/Gas: 76 lb/hr = 800 cc/min
- Connector style: USCAR/EV6
- High Impedance
- Minimum Injector Pulse-width: 0.2917ms
- Series: EV14
- Factory fitted with Viton upper and lower o-rings
- Compatible with all fuel types
PCM programming is required whenever your injector size is changed. These injectors are currently limited to email remote tuning only, we cannot do core flashes at this time.
Sold in sets of 4.
Recently viewed