Build Sheet For a L67 Series II Supercharged Car
The following is a build up for a stock supercharged car that will bolt on about 50hp and add around 2+ MPG. You must add a bolt in the ZZP downpipe or UBend Delete to make the list below safe. If you have a 04+ Supercharged Monte Carlo or Impala, then you would want to run a .1 larger supercharger pulley than a 97-03 supercharged car.
| Alternator Voltage Booster | Model: Stage 1 |
|---|---|
| High flow fuel filter | Model: ZZP unit |
| ZZP Modular Pulley System |
Size: 3.4 Color: Black |
| Serpentine belts | Size:658 (replaces 660) |
| NGK Spark Plugs | Model:TR6 |
| Thermostats |
Model:180 Option 1:add thermostat gasket
|
| Wizaired Cold Air Induction System |
Model: Standard Option 1:Add 4 inch K&N filter |
| ZZP 1.0 PCM |
Year of your car: select year Model: XXXXX Core charge: I am sending in my PCM first Option 1:none selected Option 2:stock gearing Option 3:stock injectors Option 4:none selected |
You can also look into our Stage 1 and 2 Performance Packages under Products/Performance packages, and if you would like to take it one step further, here are some more options:
| 1.9 ratio modified rockers | Core charge:Refundable core charge |
|---|---|
| Water Pump Underdrive Pulley | |
| Alternator Pulleys | Model:Underdrive |
| Fuel Pump Reqire Kit *Gen2 | |
| L67 High Velocity Throttle Body |
Year of your car:97/98 OR 99+ Model:Stage 1 Core charge:I’m sending in my TB first
|
TIP: You should not run rockers and a camshaft, instead you would want to run just one or the other. Rockers give up to 20hp, but a VS cam will give about 35-40hp. A XP camshaft would give about 45-50hp.Email us for larger build sheets.